Hydraulic cimper /crimping machine hydraulic hose

crimping machine hydraulic hose: Best quality and easy opearate reasonable price Low operate noise quickly delivery time

Hose crimping machine Hose swaging machine  crimping machine hydraulic hose QTD-51

Technical parameter of the Hose piping machine QTD-51                                  

1.Crimping range:Φ6mm-Φ51mm  2.Rated pressure: 31.5mpa 3.The largest crimping pressure: 409T4.Rular precision: 0.02mm5.Oil pump out-let quantity:  2.5ml/rad/2.2kw  (220V) 6.Dimension:560*450*650mm     7.Weight:255kg with wooden case8.850 stoke/hour9.10 Dies:17mm,20mm,23mm,27mm,31mm, 36mm, 41mm,47mm,53mm,63mm 

Operation:  crimping machine hydraulic hose                                           

1.Based on the size of the rubber hose to be buckled, select suitable mould as per the technical parameter reference table of the locking pipe and mount it on the mould base.

2.Regulated well the scale position as per the data in the data in the table, the pipe locking can be done. After pipe locking, use a vernier caliper to mease the outside diameter dimension of the pipe sleeve after buckling to see if it meets the reference table data of the parameter.

3. If it does not meet the data, the scale shall be precisely regulated until it meets the requirements. Because the manufactures of the pipe sleeve are different, so, specific dimension, material, hardness etc are certainly not the same.

4.These factors would result different influences on the pipe locking result, therefore, the data in the table is only for reference, the detailed data take the pressure test as the basis.

Notice:    Hose piping machine                                                                             

1.When buckling, make the joint to locate the mould center as much as possible, the joint is not buckled on the hex nut.

2.Prevent tool and other foreign matter from entering the locking head.

3.After the work is finished for each time, the eight-block mould base must be made to extend to the greatest extent, this can make the spring to be at extension status. If not, the spring will be damage.

4.When working, the hand should not stretch into the locking head.

5.The power supply must be switched off when maintenance is done.

How to Crimp the Ends on a Hydraulic Hose by crimping machine hydraulic hose ?1  Insert one end of a length of hydraulic hose into the hydraulic hose fitting. Make sure it is securely in place.

2 Set the micrometer on the hose-crimping machine according to manufacturer specifications for the kind of hose and fitting you are using. Find these specifications in the hose-crimping machine's manual.

3 Place the fitting end of the hose into the crimping machine and line up the fittings mark on the machine with the top of the hose.

4 Insert the compression ring into the crimping machine.

5 Activate the hose-crimping machine. The crimping machine's press will exert pressure on the compression ring, causing the compression mechanism to press against the hydraulic hose fitting and crimp it in place.

6 Repeat this process with the remaining end of the hydraulic hose

 

The different colour of  crimping machine hydraulic hose QTD-51                      

 

The details of crimping machine hydraulic hose QTD-51

 

 

 The packing of crimping machine hydraulic hose QTD-51 

Kindly Reminder

1 Complete workshop hydraulic hose crimping machine with full set of dies and manual

change die holder.

2 Die sets insured for life long time. we will replace die sets for you for life long time

3  If the order can exceed 30 sets hydraulic hose crimping machine annually,will offer home service.

 4 Customers can be assured of our e-mail and phone support , and longer-term service plans.

5 We will bear ourselves to ship hydraulic hose fitting crimping machine to destination port and Customers are responsible for Customs Clearance if the quantity exceed 3 sets

6 OEM or Customer-Made serice are avaliable. U can send your drawings and the detaield requirements of hydraulic hose crimping machine to us.Professional reply and promt attention will be assured. 

7 Every order can be promised fast delivery. Normally within 5workdays 8 Hose cutting machine , hose skiving machine , hydraulic hose and hose fittings are our main products, We will save much time for u.